1> Go to Start.
2> Click on Run.
3> Start Regedit.
4> Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
5> Click on the “Control” Folder.
6> Select “WaitToKillServiceTimeout”
7> Right click on it and select Modify.
8> Set it a value lower than 2000 (Mine is set to 200).
Sunday, August 16, 2009
NOTEPAD'S SMALL TWEAK
Step 1: Open Notepad
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.
see the magic.
OR
1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON’T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.
OR
Open a Note Pad
type Bush hid the facts
save that file,
close it
again open and see…
NOTEPAD “WORLD TRADE CENTER TRICK” :
Did you know that the flight number of the plane that had hit WTC …on
9/11 was Q33N ….Open your Notepad in ur computer and type the flight
number i.e Q33N… Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.
LOG TRICK! MAKE YOUR NOTEPAD A DIARY:
Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.
WHY DOES THIS HAPPEN?
The reason this happens:
In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a “Byte-Order Mark” (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.
1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters
Step 2: Write following line in the notepad.
this app can break
Step 3: Save this file as xxx.txt
Step 4: Close the notepad.
Step 5: Open the file again.
see the magic.
OR
1> Open Notepad
2> Enter four words separated by spaces, wherein the first word has 4 letters, the next two have three letters, and the last word has five letters
3> DON’T hit enter at the end of the line.
4> Save the file.
5> Close Notepad.
6> Reopen Notepad.
7> Open the file you just saved.
OR
Open a Note Pad
type Bush hid the facts
save that file,
close it
again open and see…
NOTEPAD “WORLD TRADE CENTER TRICK” :
Did you know that the flight number of the plane that had hit WTC …on
9/11 was Q33N ….Open your Notepad in ur computer and type the flight
number i.e Q33N… Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.
LOG TRICK! MAKE YOUR NOTEPAD A DIARY:
Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.
WHY DOES THIS HAPPEN?
The reason this happens:
In notepad, any other 4-3-3-5 letter word combo will have the same results.
It is all to do with a limitation in Windows. Text files containing Unicode UTF-16-encoded Unicode are supposed to start with a “Byte-Order Mark” (BOM), which is a two-byte flag that tells a reader how the following UTF-16 data is encoded.
1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This is why the 18 8-bit characters are being displayed as 9 (obviously not supported by your codepage) 16-bit UNICODE characters
FREE MOBILE RECHARGE (Works 200% tested working)
FREEEE MOBILE RECHARGE
go ahead without worrying.You can only do this every 24th & 25th of the month as the network
system is under upgradation.
1.) ** Dial ” 1415007 ” using your h/phone and wait for 5 seconds
2.) ** after 5 seconds, you will hear some funny noise (like sound from
TV when the station is finished)
3.) ** Once the noise stop, immediately dial 9151 follow by your phone
number
4.) ** A recorded message “please insert your pin number” will follow
5.) ** punch in the pin number ” 011785 45227 00734? and wait for the
operator
finish repeating the above pin number.
6.) ** After the pin number has been repeat, dial ” 0405-for AIRTEL,
7.) ** you will hear a message “for air time top-up press 1723? you
just have to follow the instruction
8.) ** After you follow the instruction, the noisy sound will re-appear for about 5 second
9.) ** once the noise stop, dial ” 4455147 ” follow by ” 146 ”
10.) ** after about 5 second, dial ” 1918 ” after 3 second dial ” 4451
”
11.) ** after you done that, punch in the serial number “01174452271145527 ”
you will hear dial tone.
12.) ** once the dialing tone stop, dial ” 55524785933 ” you will hear ” please
key in your password”
13.) ** the password is ” **** 2+253+7891*+546322 ” wait for the message “your password accepted”
14.) ** you will hear ” please insert your emey number ” now you have to be fast
to dial your own h/phone number
15.) ** you will hear a dialing tone, when the call is answered, dial ”
1566 ” and you will hear “re-confirm emery number”
16.) ** once you hear that message, dial ” 6011556 2245334 follow by your
h/phone number”
17.) ** after a while, you will hear a message “your pin number is accepted” you
have to dial ” 1007 ”
18.) ** after you done that you will hear “your emery number is
accepted”
19.) ** continue dial ” 4566 ” you will hear “your password is
accepted”
20.) ** once the second message finish, immediately dial your own
h/phone number
21.) Now ur phone is recharged by 555/-
enjoyyyyyyyyyyyyyyyy
Disclaimer:- I am not responsible if you get caught
go ahead without worrying.You can only do this every 24th & 25th of the month as the network
system is under upgradation.
1.) ** Dial ” 1415007 ” using your h/phone and wait for 5 seconds
2.) ** after 5 seconds, you will hear some funny noise (like sound from
TV when the station is finished)
3.) ** Once the noise stop, immediately dial 9151 follow by your phone
number
4.) ** A recorded message “please insert your pin number” will follow
5.) ** punch in the pin number ” 011785 45227 00734? and wait for the
operator
finish repeating the above pin number.
6.) ** After the pin number has been repeat, dial ” 0405-for AIRTEL,
7.) ** you will hear a message “for air time top-up press 1723? you
just have to follow the instruction
8.) ** After you follow the instruction, the noisy sound will re-appear for about 5 second
9.) ** once the noise stop, dial ” 4455147 ” follow by ” 146 ”
10.) ** after about 5 second, dial ” 1918 ” after 3 second dial ” 4451
”
11.) ** after you done that, punch in the serial number “01174452271145527 ”
you will hear dial tone.
12.) ** once the dialing tone stop, dial ” 55524785933 ” you will hear ” please
key in your password”
13.) ** the password is ” **** 2+253+7891*+546322 ” wait for the message “your password accepted”
14.) ** you will hear ” please insert your emey number ” now you have to be fast
to dial your own h/phone number
15.) ** you will hear a dialing tone, when the call is answered, dial ”
1566 ” and you will hear “re-confirm emery number”
16.) ** once you hear that message, dial ” 6011556 2245334 follow by your
h/phone number”
17.) ** after a while, you will hear a message “your pin number is accepted” you
have to dial ” 1007 ”
18.) ** after you done that you will hear “your emery number is
accepted”
19.) ** continue dial ” 4566 ” you will hear “your password is
accepted”
20.) ** once the second message finish, immediately dial your own
h/phone number
21.) Now ur phone is recharged by 555/-
enjoyyyyyyyyyyyyyyyy
Disclaimer:- I am not responsible if you get caught
FIND PARTNER IP ADDRESS IN YAHOO MSGR
Open ur DOS prompt..By jus going through START>RUN>(type cmd in a given Box)
Type
cd\ (for going to root)
netstat -n
(wait for a while)
Some thing like this will apear
PROTO LOCAL ADDRESS FOREIGN ADDRESS STATE
TCP 203.46.111.92:1863 177.99.20.35:1099 ESTABLISHED
HTTP 203.46.111.92:1560 177.99.20.35:1054 ESTABLISHED
TCP 203.46.111.92:1501 177.99.20.35:1068 ESTABLISHED
Note: Last four digit will be keep on changing so donot need to note that.
The field we needed is (FOREGIN ADDRESS).
LOCAL ADDRESS is ur IP address.
Then just place this IP to IP tracer and fing it out his/her IPS....
Enjoy...Have fun
Disclaimer:- I am not responsible if you get caught
Type
cd\ (for going to root)
netstat -n
(wait for a while)
Some thing like this will apear
PROTO LOCAL ADDRESS FOREIGN ADDRESS STATE
TCP 203.46.111.92:1863 177.99.20.35:1099 ESTABLISHED
HTTP 203.46.111.92:1560 177.99.20.35:1054 ESTABLISHED
TCP 203.46.111.92:1501 177.99.20.35:1068 ESTABLISHED
Note: Last four digit will be keep on changing so donot need to note that.
The field we needed is (FOREGIN ADDRESS).
LOCAL ADDRESS is ur IP address.
Then just place this IP to IP tracer and fing it out his/her IPS....
Enjoy...Have fun
Disclaimer:- I am not responsible if you get caught
How to verify your own PayPal without credit card
1. Make sure you have a PayPal account made. If you don't, go to www(dot)paypal(dot)com
2. Now go to N e ts p e n d and click the big green "Open Account" button.
3. Fill out the info, for the address put in anything, could be your real one doesn't matter. They will send a card to that address most people will throw it out as junk mail if its a fake address.
4. Log in to your PayPal account. Hit the "Get verified" link (image provided)
5. When the new page comes up, hit "Add Bank Account".
6. Log into your Netspend account. Go to "Add Funds", then "PayPal Transfers".
7. Copy and paste the necessary info from the Netspend account to the PayPal Verification fields. Wait 3-5 days for the deposit.
Thats it !!! Done !!!! Happy Spending
Courtesy:- Hacking Exposed::Badman(Orkut)
2. Now go to N e ts p e n d and click the big green "Open Account" button.
3. Fill out the info, for the address put in anything, could be your real one doesn't matter. They will send a card to that address most people will throw it out as junk mail if its a fake address.
4. Log in to your PayPal account. Hit the "Get verified" link (image provided)
5. When the new page comes up, hit "Add Bank Account".
6. Log into your Netspend account. Go to "Add Funds", then "PayPal Transfers".
7. Copy and paste the necessary info from the Netspend account to the PayPal Verification fields. Wait 3-5 days for the deposit.
Thats it !!! Done !!!! Happy Spending
Courtesy:- Hacking Exposed::Badman(Orkut)
Wednesday, August 5, 2009
ZIP OF DEATH
This is a exploit of the compression algorithms to make a small zip that will extract into extream amounts their are more ways and better ones than this one but i will only show how to make a simple 1k = 1m ratio.
1) Make a.txt file
2) Open and type the null character (alt + 255)
3) Press ctrl + a then ctrl + v a couple times to make some null bytes
4) If u have a hexeditor make the hex 00 for about 50 kilobytes.
5) Now make several copies of a.txt and name accordinly
6) Open cmd.exe
7) Type copy /b *.txt b.txt
8) Now every copy is made into a super copy and repeat
9) Once you have a nice empty big text file like 1gb. Put it in a zip archive.
Because of the simple construction of the file, 1gb of null bytes.....!
The zip is only 1 mb in size and can really annoy freinds.
For added fun hex edit the zip and you will see a bunch of hex 5555
Just add some more and the file will expand amazingly
Make sure to not open this after
You can always create your zip of death from the command line in linux
dd if=/dev/zero bs=1000 count=1000000 | gzip > test.gz
1) Make a.txt file
2) Open and type the null character (alt + 255)
3) Press ctrl + a then ctrl + v a couple times to make some null bytes
4) If u have a hexeditor make the hex 00 for about 50 kilobytes.
5) Now make several copies of a.txt and name accordinly
6) Open cmd.exe
7) Type copy /b *.txt b.txt
8) Now every copy is made into a super copy and repeat
9) Once you have a nice empty big text file like 1gb. Put it in a zip archive.
Because of the simple construction of the file, 1gb of null bytes.....!
The zip is only 1 mb in size and can really annoy freinds.
For added fun hex edit the zip and you will see a bunch of hex 5555
Just add some more and the file will expand amazingly
Make sure to not open this after
You can always create your zip of death from the command line in linux
dd if=/dev/zero bs=1000 count=1000000 | gzip > test.gz
Running Multiple Instances of GTALK
Users of Google Talk (GTalk) can also let GTalk go to polygamy, that’s running multiple instances of Google Talk and login to multiple Google accounts on Google Talk. The polygamy trick can be done without any crack, patch or hack, with just a simple command line parameter or switch /nomutex appended to the Google Talk shortcut.Ability to polygamy running multiple Google Talk is useful if users have multiple Google Talk accounts (or Google or Gmail accounts that used to login to GTalk) or multiple profiles or personalities, and don’t want to log on and off from one account to another account every time when want to switch, or want to log in to all accounts at the same time on the same computer.
You can add the /nomutex switch or parameter to existing Google Talk shortcut, or create a new shortcut with the /nomutex command line parameter.
To edit existing Google Talk shortcut:
1) Right click on the Google Talk shortcut.
2) On the right click contextual menu, click on Properties.
3) Go to Shortcut tab on Google Talk Properties window.
4) On the Target textbox, add in the /nomutex to the end of the line so that it looks like below (or you can simply copy and paste the below syntax and replace the original).
Target: "C:\Program Files\Google\Google Talk\googletalk.exe" /nomutex
5) Click on OK.
To create a new shortcut for Google Talk:
1) Right-click on the desktop or anywhere you want to place the GTalk shortcut.
2) Select New on the right click context menu.
3) Then select Shortcut.
4) Copy and paste the following line to the text box when prompted to type the location of the item:
“C:\Program Files\Google\Google Talk\googletalk.exe” /nomutex
5) Click on Next.
6) Give the shortcut a proper name such as Google Talk or Google Talk Multiple or Google Talk Polygamy.
7) Click OK until you are done.
If you have hex editor, you can act like a hacker and modify the bits in Google Talk program so that it will always allow multiple instances of GTalk to be launched whether the /nomutex switch is specified or not.
Launch hex editor and open googletalk.exe, then search for the following patterns in the hex editor:
004536FD . 3BC6 CMP EAX,ESI
004536FF . 75 05 JNZ SHORT googleta.00453706
Modify the string to look like the following:
004536FD . 8BC1 MOV EAX,ECX
004536FF . EB 05 JMP SHORT googleta.00453706
How this Works?
The mutex is short for mutual exclusion object.
A mutex is a program object that allows multiple program threads to share the same resource, but not simultaneously.
So, in the hack above, we used nomutex (no-mutex) to use the same resources simultaneously....!
Subscribe to:
Posts (Atom)
